Congratulations on purchasing NeuroSync Pro. Once you have downloaded and installed the software, follow these steps to prepare NeuroSync Pro for first use.
Step 1: Open the settings
- Start NeuroSync Pro.
- Locate the settings panel in the lower-right corner of the screen.
- Click the panel to open the settings.
Step 2: Select the language
The language setting is available in the Personal, Audio and Audio+Light editions:
- Select English to use the software in English.
- Select Nederlands to use the software in Dutch.
NeuroSync Pro uses English by default.
Step 3: Check the light settings (Audio+Light only)
If you use the Audio+Light edition, also check the light fixture and DMX controller settings.
Select the light fixture
Select the light fixture you want to use. The supplied fixture is selected by default, so this setting normally does not need to be changed.
Select the DMX controller
Select the DMX controller you want to use. The supplied controller is also selected by default.
Check the IP address and universe
| Setting | Default value |
|---|---|
| IP address | 2.0.0.1 |
| Universe | 0 |
These values are configured correctly in advance. Change them only when you use a different network or DMX configuration.
NeuroSync Pro automatically imports the music tracks and makes them available in the software.
Ready to use
NeuroSync Pro is now ready to use. You can select a preset session or, depending on your edition, adjust the audio, light and brainwave entrainment settings yourself.
For your first sessions, use a comfortable chair or reclining position and a good pair of headphones for the best experience.
Enjoy NeuroSync Pro!